the rail is the track along which the massage rollers run at the back of the chair. An S-track follows the curved shape of the spine, whilst an L-track also runs beneath the buttocks and thighs. The SL-track combines both and massages from the neck right down to below the buttocks. At NAIPO, the tracks range in length from 80 cm to 135 cm.
Show table of contents
What the rail does in a massage chair
In the backrest of a massage chair is a massage mechanism with rollers. It moves up and down along a guide. This guide is called a rail. Its shape determines how close the rollers stay to the body. Its length determines how far they reach. You’ll notice both of these things immediately when you sit down in the chair: do the rollers stay in the small of your back, or do they lose contact there?
An overview of the three designs
S-track
The S-rail is curved like a spine when viewed from the side. The rollers thus follow the natural curvature of the neck, thoracic spine and lumbar region. It ends roughly at the level of the pelvis.
L-shaped rail
The L-frame bends at the lower end and runs under the seat. This means the rollers also reach the buttocks and the back of the thighs. Depending on the design, the backrest section tends to be straighter.
SL splint
The SL splint, often also called the S+L splint, combines both shapes. At the top, it follows the S-curve; at the bottom, it runs under the seat. It thus covers the longest distance and stays close to the body across the back. With flexible SL splints, the track also adapts to the shape of the body.
Why length matters
The length of the rail determines how far the rollers can travel. A short rail mainly massages the shoulders and back. A long rail extends down to below the buttocks and thighs. This is particularly important for taller people, as the distance between their shoulders and buttocks is greater. You can find more information on this under Massage chairs for taller people.
However, a long rail alone does not guarantee a good massage. It is also important how well the chair recognises your body shape. Many chairs measure your back at the start to do this. How this works is explained in How does the body scan work on massage chairs?.
Which rail is fitted in which NAIPO chair
| Model | Track | Length |
|---|---|---|
| Model P Classic Comfort | SL rail | 112 cm |
| ZenFlow | SL rail | 112 cm |
| SkySuite | SL rail | 115 cm |
| Model L Pro | Flexible SL rail | 121 cm |
| Optimus | Flexible SL rail | 130 cm |
| Tai Chi Flow | Our own, patented splint | 135 cm |
| Space Walk Cycling | L-track | 125 cm |
| Model U ClassicSwing | L-rail | 80 cm |
Compare all models and their specifications in the overview of all massage chairs.
The rail and massage technology go hand in hand
The rail determines where the rollers move to. The technology determines how they work. A 2D mechanism moves the rollers up and down and from side to side. With 3D and 4D, depth and rhythm are added. A long SL rail with a simple mechanism therefore feels different to a shorter rail with a 4D mechanism. The difference is explained in Massage chairs: 2D, 3D or 4D.
How to check the rail when trying out a chair
- Start a programme for the whole back and pay attention to where the rollers begin at the top and end at the bottom.
- Can you still feel the rollers clearly in your lower back, or do they become less noticeable there?
- Do the rollers reach right down to the base of the buttocks?
- Do they apply pleasant pressure to the neck, or is it too strong?
You’ll score more points in the in-store test by trying out massage chairs. Use the store finder to see where you can test NAIPO chairs.
Frequently asked questions
Is an SL rail always better than an L rail?
For a continuous massage from the neck to the buttocks, usually yes, because it follows the spine whilst still reaching under the seat. If you mainly want to massage your shoulders and back, a shorter rail will also do the job just fine.
What does a flexible SL rail mean?
The rail isn’t rigid but adapts to the shape of the body within certain limits. This means the rollers stay closer to the body, even with different back shapes.
How long should the rail be?
There’s no fixed limit. At NAIPO, most models with an SL rail range from 112 cm to 135 cm. The most reliable way to check whether the length suits your height is to try it out in the chair.




Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.