Who repairs massage chairs? Contact and instructions
A broken massage chair is often a challenge, but nothing to worry about. In many cases, problems with the massage chair can be fixed yourself. With the right equipment and parts, you can repair the chair and thus avoid the cost of expensive repairs.
If you are unable to complete the repair yourself, you will find a contact option at the end of this article.
Step-by-step instructions: Repair your massage chair yourself
Step 1: Familiarize yourself with the manufacturer's manual and check which parts may be defective.
Step 2: Check that the drive belts are in good condition and discard them immediately if necessary.
Step 3: Carefully remove all cover plates, as heating plates or connectors may be hidden underneath.
Step 4: Check the condition of all screws and bolts and carefully drill out any seized screws.
Step 5: Turn off all connectors and electronic components and read the resistance of all components to identify possible sources of error (smartphones often help here).
Step 6: Test the function of each axis of movement separately to find out where there is potential.
Step 7: If necessary, obtain special spare parts directly from the manufacturer of the massage chair - especially if they are only available there.
When repairing a massage chair, always remember that safety comes first. Therefore, you should first make sure all electrical connections are properly disconnected before beginning any work.
First, it's recommended to read the manufacturer's manual carefully to identify any faulty parts. Once you've done that, check whether the drive belts are in good condition. If any irregularities appear, it's advisable to replace them immediately.
For further steps, any cover plates must be removed – however, caution is advised here, as depending on the massage chair, various components may be concealed (such as heating plates or connectors). Next, check all screws and bolts for their condition to prevent any unpleasant surprises. If a seized screw appears, it may need to be carefully drilled out.
Once you have thoroughly examined the external parts, it's time to move on to the internal components - repairs are usually quite simple: You switch off all connectors and electronic components and read the resistance of all components to identify any possible sources of error.
To analyze the mechanical part, it is advisable to test the function of each movement axis separately and determine in which area there is potential.
Some massage chair models require special spare parts, which are often only available directly from the manufacturer; others require simple tools like a screwdriver. Depending on the model, you'll need to prioritize accordingly. If in doubt, we recommend contacting the customer service department for the specific model directly!
The following points must be observed: Above all, observe safety regulations; take a close look at loops and straps; remove cover plates; test programs; obtain any necessary spare parts; read the instructions carefully and, of course, be patient and precise when working!
Contact details: Request massage chair repair
In any case, contact the support team of your massage chair provider.
It is best to always find out in advance whether such a service is even offered.
Unfortunately, many massage chair providers do not offer any service at all and this is not always clear in advance.
Users of NAIPO and ASPRIA massage chairs have it easy, as they can simply contact the following email: support@mustbuy.eu
Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.